{"product_id":"verus-engineering-front-splitter-kit-2020-2021-toyota-a90-supra-uyny0r","title":"Verus Engineering Front Splitter Kit - 2020-2021 Toyota A90 Supra","description":"\u003cp\u003eFront splitters are very effective at producing front-end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. Utilizing scan data directly from the car and CFD, we were able to produce a splitter that pairs well with our UCW rear wing and can easily handle the loads seen by the splitter. The splitter mounts to multiple chassis locations for a strong and durable mounting style. All hardware locations are recessed for improved aerodynamic performance.\u003c\/p\u003e_x000D_\n\u003ch4 align=\"center\"\u003eVerus Engineering Front Splitter Kit\u003c\/h4\u003e_x000D_\n_x000D_\n\u003chr\u003e_x000D_\n_x000D_\n\u003ch4\u003eHighlights\u003c\/h4\u003e_x000D_\n\u003cul\u003e_x000D_\n\u003cli\u003eTwo-Piece Carbon Polyweave Splitter Blade\u003c\/li\u003e_x000D_\n\u003cli\u003eTwo-Piece Aluminum Front Air Dam\u003c\/li\u003e_x000D_\n\u003cli\u003eSheet Aluminum\/Steel Chassis Bracket (10 Pieces)\u003c\/li\u003e_x000D_\n\u003cli\u003eRubber Splitter Edge Seal\u003c\/li\u003e_x000D_\n\u003cli\u003eHardware Kit Including All Necessary Bolts\/Nuts\/Washers\u003c\/li\u003e_x000D_\n\u003cli\u003eGreatly Increases Front End Downforce\u003c\/li\u003e_x000D_\n\u003cli\u003eProduces High Downforce for Large Rear Wings\u003c\/li\u003e_x000D_\n\u003cli\u003eCapable of Handling 300+ Lbs\u003c\/li\u003e_x000D_\n\u003cli\u003eConstructed From Carbon Polyweave, Which Offers Strength, Low Weight, Durability, and a Great Appearance\u003c\/li\u003e_x000D_\n\u003cli\u003eSame Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1\u003c\/li\u003e_x000D_\n\u003cli\u003eIntegrated Air Dam that Follows The Front Bumper Lines Well\u003c\/li\u003e_x000D_\n\u003c\/ul\u003e_x000D_\n_x000D_\n\u003ch4\u003eFaster Track Times\u003c\/h4\u003e_x000D_\n\u003cp\u003eFront splitters are very effective at producing front-end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. Utilizing scan data directly from the car and CFD, we were able to produce a splitter that pairs well with our UCW rear wing and can easily handle the loads seen by the splitter. The splitter mounts to multiple chassis locations for a strong and durable mounting style. All hardware locations are recessed for improved aerodynamic performance.\u003c\/p\u003e_x000D_\n_x000D_\n\u003cp\u003eThe splitter is produced from a carbon polyweave, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either.  The material is also lightweight and stiff; which makes it a great splitter material.\u003c\/p\u003e_x000D_\n_x000D_\n\u003cp\u003eThe air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further.  The air dam is produced from sheet aluminum and then powder coated black for durability.\u003c\/p\u003e_x000D_\n_x000D_\n\u003ch4\u003eSpecs\u003c\/h4\u003e_x000D_\n\u003cul\u003e_x000D_\n\u003cli\u003eFront Splitter is Manufactured From Carbon Polyweave, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options\u003c\/li\u003e_x000D_\n\u003cli\u003eWill Not Grab and Bend Surfaces Like Aluminum Units\u003c\/li\u003e_x000D_\n\u003cli\u003eWill Not Crack and Break Like Carbon and ABS Units\u003c\/li\u003e_x000D_\n\u003cli\u003eAbrasive Resistant While Stiff\u003c\/li\u003e_x000D_\n\u003cli\u003e5052 Aluminum Air Dam\u003c\/li\u003e_x000D_\n\u003cli\u003eCNC Cut and Bent Brackets\u003c\/li\u003e_x000D_\n\u003cli\u003eStainless Hardware Throughout\u003c\/li\u003e_x000D_\n\u003c\/ul\u003e_x000D_\n_x000D_\n\u003ch4\u003eThe Science Behind It\u003c\/h4\u003e_x000D_\n\u003cp\u003eFront splitters, when designed properly, greatly increase front-end grip. Utilizing state-of-the-art analysis software, we were able to extract more performance from the front splitter and air dam combo through an iterative design process. We were also able to properly size the front splitter and dive planes to counteract the rear wing and diffuser; creating a safe and effective aero balance for owners. This is important as an unbalanced car is more difficult to drive at the limit.\u003c\/p\u003e_x000D_\n_x000D_\n\u003cp\u003eThe front splitter is part of our Ventus 2 \u0026amp; 3 Aerodynamics Packages for the Mk5 Toyota Supra. The Ventus 2 \u0026amp; 3 kits boost downforce significantly from the factory vehicle. The goal was to create a package that dramatically improved the aerodynamic performance from a factory Mk5 Supra in a safe and balanced package for the typical track\/HPDE enthusiast. Another goal was to retain street-ability from the aerodynamic components; with reasonable front splitter stick out and rear wing widths.\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":52621354205464,"sku":"VERA0232A","price":626.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/4514\/4856\/files\/9hxq8brvbd5b_370069ce-6bff-41f3-ae0d-ebb046b9da0f.jpg?v=1788748437","url":"https:\/\/driveforges.com\/products\/verus-engineering-front-splitter-kit-2020-2021-toyota-a90-supra-uyny0r","provider":"Drive Forge","version":"1.0","type":"link"}