Verus Brake Cooling Kit - 2020-2021 Toyota A90 Supra
Verus Brake Cooling Kit - 2020-2021 Toyota A90 Supra
The Verus Engineering Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using an OEM inlet, carbon fender transition duct, and a well-formed duct on the backing plate, this kit directs airflow into the center of the rotor. The inlet of the kit is a beautiful carbon duct that features a constant cross-sectional area that promotes and improves flow through the brake cooling kit. The kit comes with everything necessary for an install, including pre-cut hose.
_x000D_Verus Brake Cooling Kit
_x000D_ _x000D__x000D_ _x000D_
Highlights
_x000D_- _x000D_
- Carbon Fender Transition Ducts _x000D_
- Direct Air into the Center of the Rotor _x000D_
- Stainless Backing Plate Adds Even More Airflow into Center of the Rotor _x000D_
- OEM Type Install _x000D_
- Installs in a Few Hours With Minimal Hand Tools and Know-How _x000D_
- Short Routing to Maximum Cooling Efficiency _x000D_
- Integrated Ball Joint Shield _x000D_
- Stainless Backing Plate _x000D_
- 100% Carbon Fiber, 2x2 Twill, Autoclave Cured Carbon Fiber Ducts _x000D_
- Pre-cut High-Temp Silicone Brake Duct Hose _x000D_
- All Necessary Hardware Included _x000D_
What's Included?
_x000D_- _x000D_
- Backing Plate Including Carbon Duct, Right-Hand _x000D_
- Backing Plate Including Carbon Duct, Left-Hand _x000D_
- Carbon Fender Transition Duct, Right-Hand _x000D_
- Carbon Fender Transition Duct, Left-Hand _x000D_
- 2.5" High-Temp Silicone Hose, Cut to Size (2) _x000D_
- Stainless Hose Clamp (4) _x000D_
- Zip-Tie (2) _x000D_
More Performance For Your Ride
_x000D_The Verus Engineering Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using an OEM inlet, carbon fender transition duct, and a well-formed duct on the backing plate, this kit directs airflow into the center of the rotor. The inlet of the kit is a beautiful carbon duct that features a constant cross-sectional area that promotes and improves flow through the brake cooling kit. The kit comes with everything necessary for an install, including pre-cut hose.
_x000D_ _x000D_During the design process; we utilized in-house scan data and CFD from the Supra. This resulted in a product that features a near OEM fit and finish.
_x000D_ _x000D_The brake cooling kit was designed for owners looking to reduce brake fade and improve the thermal characteristics of the brakes on the Mk5 Toyota Supra.
_x000D_ _x000D_Backed By Science
_x000D_By utilizing the high-pressure brake inlet airflow that is in place from the factory, capturing this air, and forcing it into the center of the rotor, we increase the cooling capacity of the factory and aftermarket brake system. The carbon fiber pancake duct keeps clearance with the wheel while ducting airflow to the high-temp silicone brake hose. The carbon duct on the backing plate and backing plate were both designed to increase airflow to the center of the rotor further improving cooling.